We recommend using a carbon mast offered by us.
Sails are designed for carbon masts fy Technofiber. Among them is the length of camber adjust. If you use a larger diameter mast, then the cambers is too long and do not want to skip. In this case, shorten the cambers of 3 mm or more, must be tested.
Disassembly sail in reverse order, battens Do not unscrew!
Sail pack and insert into the bag in the same manner as it was originally.
Sail never unnecessarily expose to sunlight - causes embrittlement of the material from which the sail made.
Sail never trim on concrete, gravel, sand or other sharp surfaces. It can be easily cut the stitches on sharp protrusions stones and monofilm scratch.
If you need to sail wash, use fresh water or ordinary detergent or soap.
After surfing on the salt water is good sail rinsed in fresh water before packing.
Slim Sails overview